飛行俱樂部

Radiomaster RP2 ELRS 接收機（內置陶瓷天線)。Radiomaster RP2 ELRS receiver (built-in ceramic antenna)

多買多慳

 

數量

簡介

+ 這RP1和RP2 2.4GHz ELRS nano系列接收器是基於ExpressLRS的開源接收器。 Nano 接收器由 ExpressLRS 開發團隊的 Jye Smith 率先開發，採用 ESP8285 MCU 和 SX1280 射頻芯片。RP1 有一個 UFL 天線插座，可用於全頻天線。RP2 內置陶瓷天線，重量超輕，體積小，非常適合賽車。 RP1 和 RP2 內置 WIFI，因此您可以使用 PC 或手機通過 WIFI 升級固件並通過內置 WebUI 配置接收器。 由於低延遲和高刷新率 RF 模塊，RP1 和 RP2 非常適合 FPV 比賽或遠程。由於超輕和納米尺寸，適用於 Whoops、無人機和固定翼模型，這些接收器幾乎可以安裝在任何地方！ 規格 產品型號：RP2 Nano ExpressLRS 2.4ghz 接收器 類型：ISM 天線：板載SMT天線 最大接收刷新率：500Hz/F1000Hz 最小接收器刷新率：25Hz 工作電壓：5v 重量：0.55g（板載天線） 尺寸：13mm*11mm*7mm 固件版本：預裝ExpressLRS v2.4 固件目標：RadioMaster RP1/2 2400 RX 總線接口：CRSF The RP1 and RP2 2.4GHz ELRS nano series receivers are open source receivers based on ExpressLRS. Pioneered by Jye Smith of the ExpressLRS development team, the Nano receiver uses an ESP8285 MCU and an SX1280 RF chip. The RP1 has a UFL antenna socket for full frequency antennas. The RP2 has a built-in ceramic antenna, which is ultra-light and compact, making it perfect for racing. RP1 and RP2 have built-in WIFI, so you can use PC or mobile phone to upgrade the firmware and configure the receiver through built-in WebUI through WIFI. Thanks to the low latency and high refresh rate RF modules, the RP1 and RP2 are ideal for FPV competitions or long range. Suitable for Whoops, Drones and Fixed Wing models, these receivers can be mounted almost anywhere due to their ultra-lightweight and nano size! Specification Product Model: RP2 Nano ExpressLRS 2.4ghz Receiver Type: ISM Antenna: Onboard SMT antenna Maximum receiving refresh rate: 500Hz/F1000Hz Minimum Receiver Refresh Rate: 25Hz Operating Voltage: 5v Weight: 0.55g (onboard antenna) Size: 13mm*11mm*7mm Firmware version: ExpressLRS v2.4 pre-installed Firmware target: RadioMaster RP1/2 2400 RX Bus interface: CRSF

你可能感興趣的商品